MERAVITH SCANNER Guide

A multi-pair, multi-timeframe market scanner for MetaTrader 5. One scan reads every symbol you choose on all 21 timeframes and tells you which trends are fresh, which have volume behind them, and which have a higher timeframe standing in their way. This guide shows how to run a scan, read the board and turn it into a watchlist.

21 timeframes, M1 to MN1Any symbol your broker offers5 watchlists of your ownDescribes MERAVITH SCANNER 2.20

01Start here

Most traders look at one chart at a time. The market has hundreds of symbols and MetaTrader 5 has 21 timeframes, so at any moment there are thousands of charts you are not looking at. MERAVITH SCANNER looks at them for you.

Press one button, choose what to scan (a broker category such as Forex or Indices, the currencies you trade, or your own list), and the scanner reads every symbol on every timeframe. For each one it reports:

  • The trend direction: bullish or bearish.
  • Whether volume backs it: high volume or average volume.
  • How far it has already run: no target reached yet (the freshest trends), 1st target reached, 2nd, and so on.
  • What stands in its way: higher timeframes whose own level sits between price and the trend's target, listed as resistance.

The results come back as one board, grouped by symbol, with the cleanest setups in bold. A click on any row opens that symbol and timeframe on your chart with the full picture drawn: the liquidity line, the targets, the levels of the higher timeframes and the volume dots.

Nothing is drawn by hand and no period is set. The scanner finds the start of every trend by itself, on every timeframe, on every symbol.

ProductWhat it has
MERAVITH SCANNEREverything in this guide: the M market scan across many symbols, your own watchlists, the S scan of one symbol on 21 timeframes, and the chart tools.
MERAVITHThe same chart tools and the S scan, without the M market scan. Its chart is described in the MERAVITH User Guide.

How to read this guide

Sections 03 to 08 are about the market scan: running it, reading it and getting from a row to a chart. Section 09 covers the single-symbol scan, section 10 the chart itself. Section 11 gives seven concrete ways to use the scanner, and section 14 a daily routine. If you only have ten minutes, read Your first market scan, One row, one trend and Seven ways to use the scanner.

02Installation

  1. Download the file. Sign in to My account on enigmera.com and download the indicator file (.ex5). If you bought on the MQL5 Market, MetaTrader installs it for you and you can go straight to step 4.
  2. Copy it. In MetaTrader 5 choose File → Open Data Folder, open MQL5\Indicators and put the file there.
  3. Refresh. In the Navigator, right-click Indicators and choose Refresh.
  4. Attach it. Drag MERAVITH SCANNER onto any chart. In the Inputs tab paste your License Key from My account (enigmera.com version) and press OK.
  5. Fill your Market Watch. The scanner scans the symbols your terminal knows. Right-click the Market Watch window and choose Show All, or add only the symbols you trade.

Load the history once, especially for stocks and indices

A scan needs the price history of every symbol on every timeframe. MetaTrader downloads it from your broker the first time a symbol is opened, and a scan cannot wait for a download, so the first scan of a new category can stall or leave rows empty. The free Enigmera History Loader (an Expert Advisor, also in the Bonus tab of the product page) downloads the history of all Market Watch symbols on all 21 timeframes in advance and keeps it ready. Attach it to one empty chart and leave it running.

Updating to a new version: download the new file, replace the old one in MQL5\Indicators, then remove the indicator from the chart and attach it again. MetaTrader keeps the old version running until you do.

03Your first market scan

Nine buttons sit in a row at the top of the chart. A green frame means on, a red frame means off.

  1. Press M. The scan picker opens on the left of the chart.
  2. Tick a category, for example Forex, or click one of your lists. Leave TF: All, Dir: All and Cur: All for the first time.
  3. Press START SCAN. The chart switches from symbol to symbol while the scan runs. Do not touch it until the results board appears. A list of ten symbols takes about one to two minutes, a whole Forex folder several minutes.
  4. Press Sort. The trends with the most room left to run come first.
  5. Click a bold row that reads no Res. The chart opens on that symbol and timeframe. Press A for the trading plan: target, stop and risk/reward.

That is the whole workflow. The rest of this guide explains each step in depth.

04The scan picker

The picker on a GOLD H4 chart. The broker's categories are listed with the number of symbols in each. Folders with an arrow open with a click.

Press M and the picker appears. From top to bottom:

RowWhat it does
TFWhich timeframes to scan. All scans all 21: M1, M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3, H4, H6, H8, H12, D1, W1 and MN1. Tick single timeframes to scan only those, for example H1, H4 and D1 for swing trading. Fewer timeframes means a faster scan.
DirAll, ▲ Bull or ▼ Bear. Show every trend, only the bullish ones or only the bearish ones.
CurThe currencies you trade: USD, EUR, JPY, GBP, CHF, CAD, AUD and NZD. With EUR ticked, only symbols that contain EUR are scanned. Tick several to scan their crosses too.
ListsYour five watchlists. The number in brackets is how many symbols each one holds. Click a list to scan it at once, or Edit to change it. See Your own watchlists.
CategoriesYour broker's symbol groups as a tree: Forex, Metals, Indices, Shares, Crypto and so on, with the number of symbols in each. Tick one or more with the checkboxes, or click a folder to open it and scan a part of it.
START SCANRuns the scan with everything you ticked.

The filters combine. Forex + Cur: JPY + Dir: Bear + TF: H1, H4, D1 gives you every bearish yen trend on the three swing timeframes, and nothing else.

05Reading the results

The results of a scan with a currency filter: 174 trends on the board, grouped by symbol. The arrow marks the row that is on the chart, AUDCHF on 8 hours, and the chart shows that trend with its liquidity line and targets.

When the scan ends the picker is replaced by the results board. Its title says how the scan was made, for example Currency Filter or the name of your list, and a counter says how many trends were found.

One row, one trend

Every row is one symbol on one timeframe. The first line names them, the second line describes the trend:

EURCHF  1 hour
Bullish · avg vol · non-exh. · 2h,3h,4h,8h,D Res

EURCHF  2 hours
Bearish · high vol · non-exh. · no Res
You seeMeaning
Bullish / BearishThe direction of the current trend on that timeframe. The whole second line takes the trend's colour: green for bullish, red for bearish.
high vol / avg volWhether bars of unusually high volume confirm the trend. high vol means real participation behind the move.
non-exh. / 1st exh / 2nd exh …How many of the trend's targets are already reached. non-exh. means none yet: the trend still has its first target ahead of it, which is the freshest state. 1st exh means the first target was reached and the second is next. Each further target is less likely than the one before.
8h,D ResHigher timeframes whose level stands between price and this trend's target, always in orange. See Resistance from higher timeframes.
no ResNothing in the way. The path to the target is clear.
warningsThe volume picture is unclear: high volume on both sides of the liquidity line, high volume against the trend, or price in a range. Skip these rows; there will be cleaner ones.
● instead of a trend wordPrice never came back to the liquidity line in this trend. It jumped past it, which is often a very strong trend.
➤ arrowThe row that is on your chart right now.

The bold rows

A row in bold with a coloured background (dark green for bullish, dark red for bearish) is the cleanest kind of setup the scanner knows:

  • high volume behind the trend,
  • no target reached yet,
  • no warnings,
  • no higher timeframe in the way.

These are the rows to look at first. A symbol with several bold rows on neighbouring timeframes, for example 2 hours, 3 hours and 4 hours all bold and bearish, is a trend that several timeframes agree on.

Resistance from higher timeframes

Every timeframe has its own liquidity line, the balance point of its current trend. When a higher timeframe is trending the other way and its line sits between price and your trend's target, your trend has to get through that line first. The scanner lists such timeframes at the end of the row, in orange: 4h,8h Res means the 4-hour and 8-hour lines are in the way. A thin orange bar on the left of the row marks it too.

This is the most common reason a good-looking trend stalls. A clean bullish trend on M15 with D Res often runs exactly to the daily line and turns. Treat the first resistance as the first profit target, or wait for a candle to close beyond it before you expect the full move.

Always check for Res before you enter

Rows with no Res have a clear path. Rows with resistance can still be traded, but with the first resistance as the target and with a smaller size.

Moving around the board

ControlWhat it does
▲ ▼ and 40-63 / 174The board shows one page of rows at a time. The arrows at the bottom turn the pages, and the counter says which rows are on screen.
½Halves the height of the board so you see more chart.
A- / A+Makes the whole board smaller or bigger, by 10% a click, from 70% to 180%. The size is the same for every board and chart and survives a restart.
‹ tab on the right edgeFolds the board away to the left so the chart is free. The tab at the left edge brings it back. Remembered per chart.
Board titleA click on the title (MERAVITH SCANNER ver. 2.20 …) opens a summary of the top symbols above the rows. Click again to close it.
Divider linesA thin line separates one symbol's rows from the next, so a symbol's timeframes are read as a group.

06Sort, Rescan and the cache

After Sort the trends with the most room left come first: the first page is nothing but bold rows with high volume, no target reached and no resistance.

The board comes back grouped by symbol, in the order of the scan. Two buttons at the top change that:

  • Sort orders every row by the distance left to its first target, so the trends with the most room to run come first. The bold rows naturally rise to the top. Unsort restores the grouped order.
  • Rescan repeats exactly the same scan: the same category, list and filters. Use it after a few hours to see what changed.

Back returns to the picker without losing anything: the results of every category and list you have scanned are kept in memory, so you can move between Forex, Indices and your lists without scanning again. Only a new scan of the same category replaces its results.

Every scan is also written to a text file in MQL5\Files when it ends, so you can keep a record or open it in a spreadsheet.

07Your own watchlists

The editor of List 1: eight symbols ticked in green out of the whole Market Watch. A list can mix Forex pairs, an index and a currency index.

A watchlist is the fastest way to scan. Instead of a whole broker category you scan only the symbols you actually trade, and the results come back in a minute or two.

  • The picker has a row Lists: 1 2 3 4 5 Edit. The number in brackets is how many symbols each list holds.
  • Click a list to scan only its symbols. The board carries the list's name, and Rescan scans the same list again.
  • Click an empty list or Edit to open the editor. The five lists appear as tabs, with every symbol of your Market Watch as a tile. A green tile is in the list, and a click adds or removes it. All ticks every symbol, None clears the list and Done goes back.
  • Every click is saved at once to a file in MQL5\Files. Deleting MetaTrader's global variables (F3) does not clear your lists.
  • The Cur and TF filters narrow a list scan too.
  • If you also use Enigmera Terminal, the scanner takes over the lists you made there the first time it starts.

A good way to use the five lists

  • List 1: the pairs you trade every day.
  • List 2: majors only, for a quick view of the dollar.
  • List 3: metals and indices.
  • List 4: the symbols that came out bold in this week's full scan, to rescan them each morning.
  • List 5: whatever you are studying right now.

08From the board to the chart

A click on GBPAUD 8 hours: the chart switches to that pair and timeframe with the whole picture drawn, and the board stays open so you can go on to the next row.

Click any row and the chart switches to that symbol and timeframe. Everything the scanner knows about the trend is drawn: the start of the trend, the liquidity line, the exhaustion targets, the support lines, the volume dots and, with MTF on, the levels of the other timeframes. The board stays open with the arrow on your row.

From here the usual next steps are:

  1. Press S to see this symbol on all 21 timeframes and check whether the neighbouring timeframes agree with the one you clicked. See One symbol on 21 timeframes.
  2. Press A for the trading plan: the trend and its volume, the supports, the target, the stop, the risk/reward ratio and the position size for your risk percentage. If the panel shows a warning, reduce the size or wait.
  3. Look for RESISTANCE on the chart. A higher-timeframe line of the opposite trend between price and the target blinks with that label. It is the same information as the orange Res on the board, now at its exact price.

While the results board is open, the scanner does not start any automatic single-symbol scan on the chart you clicked, so the board stays until you close it.

09One symbol on 21 timeframes

GOLD on every timeframe. The small timeframes are mixed, 3 hours to Weekly are bearish, and the Monthly is still bullish after its third target: a bearish correction inside a bigger bullish trend.

Press S and the scanner reads the current symbol on all 21 timeframes and opens a board with one row per timeframe. The rows read exactly like the market scan's rows. When the scan ends, the chart moves to the timeframe the board marks as the best setup and the board opens there.

This is the board to read after the market scan found a candidate:

  • Three or more neighbouring timeframes pointing the same way, for example H1, H4 and D1 all bearish, is a trend worth trading.
  • A bold row among them with no Res is the timeframe to trade it on.
  • Small timeframes against the big ones is a pullback inside the bigger trend: wait for the small ones to turn, then join the big ones.
  • The highest timeframes exhausted (2nd exh, 3rd exh) while the small ones start the other way is where reversals begin.

Click a row to open its details: the ladder of targets with prices and distances in pips, the alignment with the next higher timeframe, and the sentiment reading. Click the timeframe to switch the chart to it.

GOLD on M15 after a click on its row. The levels of the higher timeframes (EQ H1 to EQ H8) stand above price, with grey zones between them: every one is a place where a bounce can stall.

10What the chart shows

The chart tools are the same in MERAVITH SCANNER and MERAVITH, and the MERAVITH User Guide describes every line, panel and setting in full. The short version, enough to read a chart the scanner opened:

LineLooks likeWhat it means
Liquidity line━━ orangeThe balance point of the current trend, labelled VOLUME EQUILIBRIUM. Support in a bullish trend, resistance in a bearish one. A clean break of it usually ends the trend.
1st bullish target━━ teal, thickWhere a bullish trend is most likely to run out, labelled BULLISH VOLUME EXHAUSTION. Up to 12 further levels beyond it.
1st bearish target━━ crimson, thickWhere a bearish trend is most likely to run out, labelled BEARISH VOLUME EXHAUSTION.
TOP / BOTTOMtextWhere the current trend began: a TOP starts a bearish trend, a BOTTOM a bullish one. The scanner places it by itself; you can drag the start line to study another start.
EQ H1, EQ H4, EQ D1 …┄┄ dottedThe liquidity lines of the other timeframes, teal for a bullish one and crimson for a bearish one (button MTF). One of the opposite trend between price and your target blinks with the label RESISTANCE. The grey shading between two neighbouring lines that disagree is a liquidity pool, where price often reacts.
Exh H2, Exh D1 …labelsThe first targets of the higher timeframes (button Exh), so a nearby higher-timeframe target is always in view.
Volume dots● ●Bars of unusually high (blue) or exceptional (purple) volume. On the trend side of the liquidity line they confirm the trend; on the wrong side they warn.
Chart backgrounddark green / dark redA bullish or bearish trend that has not reached its first target yet. Black once it has.

The other buttons: A opens the trading plan, BT counts the past trends of the chart as wins and losses, Hist shows how the grey zones moved during the trend, Alt previews the opposite trend that would take over if the current one ended now, and ON / OFF hides everything for a clean chart.

11Seven ways to use the scanner

1. The morning watchlist

Scan your List 1 (or Forex with your currencies ticked), press Sort, and write down every bold row with no Res. That is the day's watchlist: fresh trends with volume behind them and a clear path to the first target. Then open each one, press S, and keep only those where the neighbouring timeframes agree.

2. Fresh trends only

A trend that has reached its 2nd or 3rd target is old. Look for non-exh. rows: the first target is still ahead, which is the largest and most likely move the trend has to offer. The Sort button does this for you, because the trends with the most room left come first.

3. Trade with the big timeframes

Tick TF: D1, W1, MN1 and scan Forex. The result is the direction of every pair on the big timeframes in one board. Then scan again with TF: M15, M30, H1 and Dir set to the same direction. Every small-timeframe trend that agrees with its daily trend is a continuation setup; the small trends against it are pullbacks to wait out.

4. One currency, every cross

Tick Cur: JPY and scan. If most yen crosses come out bearish with high volume, the yen itself is strong, and the cleanest bold row among them is the pair to trade it on. The same with USD before a Federal Reserve day, or GBP before a Bank of England day.

5. Avoid the walls

Before any entry, read the end of the row. no Res is a clear path. D,Mn Res means the daily and monthly lines are in the way, and the trade should aim at the first of them, not at the trend's own target. Rows with a long list of resistances (2h,3h,4h,8h,D Res) are trends squeezed under a stack of higher-timeframe levels: skip them.

6. Find reversals

Scan with TF: H4, H8, D1 and look for symbols whose rows read 2nd exh or 3rd exh on the high timeframes while the small timeframes already show bold rows the other way. Open the symbol, press Alt to see where the opposite trend would begin and what its first target would be, and plan the reversal before it happens.

7. Stocks, indices and crypto

The scanner works on any symbol your broker offers: Forex, metals, indices, shares, cryptocurrencies. Scan CFD-Shares on Friday evening with TF: D1, W1 to find the stocks in fresh weekly trends, and put the bold ones into List 3 for Monday. Run the History Loader first, so the history of a hundred shares is ready when the scan starts.

12Automatic scans and alerts

  • Auto-scan: the setting Auto-scan all timeframes periodically repeats the S scan of the chart's symbol every few minutes (Auto-scan interval in minutes, default 5). It waits while the M board is open.
  • Support break: when the last closed candle breaks the trend's support line completely, the scanner starts an S scan by itself, at most once per candle, so you see at once whether the higher timeframes confirm the break. While the M board is open it waits, and starts as soon as you close M.
  • Alerts: every alert can arrive as a popup with sound, by email, as a push message to MetaTrader on your phone, and with a screenshot. The useful ones after a scan are Exhaustion (price touches a target for the first time), Support (price reaches the support line) and Resistance (a candle reaches a higher-timeframe RESISTANCE line). All alerts are off by default.
  • Price line: triple-click anywhere on the chart to place a yellow alert line. You get an alert when price reaches it.

A practical pattern: scan in the morning, open the three best candidates on three charts, switch on the Exhaustion and Resistance alerts on each, and let the market come to you.

13Speed, history and saved results

A scan reads every symbol on every ticked timeframe, so the number of steps is symbols × timeframes. A list of 10 symbols on all 21 timeframes is 210 steps and takes about one to two minutes. A Forex folder of 29 pairs is about 600 steps and takes several minutes. Three things make it faster:

  • Tick only the timeframes you trade in TF.
  • Scan a list instead of a category.
  • Keep the History Loader running, so no step waits for a download.

Rows that stay empty or show "?" mean MetaTrader does not have the history of that symbol on that timeframe yet. Open the symbol on that timeframe once, press Page Up or Home a few times to load it, and scan again. The History Loader prevents this.

While a scan runs, the chart switches from symbol to symbol. Let it finish: clicking, changing the timeframe or dragging during a scan can interrupt it. A short note under the buttons says scan in progress, and the results board appears when it ends.

Saved results: every scan is written to a text file in MQL5\Files, and your lists and the board size are saved there too, so they survive a restart and deleting the global variables.

14A daily routine

Before the session (15 minutes)

  1. M: scan List 1, or Forex with your currencies ticked. Press Sort. Note the bold rows with no Res.
  2. S: open each candidate and check that three or more neighbouring timeframes agree.
  3. A: read the target, the stop and the risk/reward. Aim for 2:1 or better.
  4. Alerts: switch on Exhaustion, Support and Resistance for the charts you keep open.

During the session

  • Press Rescan every few hours. New bold rows are new trends; rows that lost their bold have reached a target or got a warning.
  • When the S board refreshes by itself, a support has just broken. Look at the higher timeframes before you act.
  • When an Exhaustion alert fires, decide: take profit, or trail the stop behind the support line.

After the session

  • Put today's bold symbols into List 4, so tomorrow's first scan is a quick one.
  • On Friday evening, scan the whole Forex folder and the shares you follow, so Monday starts with a ready watchlist.

15Questions

How many symbols and timeframes can it scan?

Any number of symbols your terminal holds, on all 21 timeframes of MetaTrader 5, from M1 to Monthly. The time a scan takes grows with symbols × timeframes, so tick fewer timeframes or use a list when you want a fast answer.

Does it work on stocks, indices and crypto?

Yes. The scanner reads any symbol your broker offers: Forex, metals, indices, shares, cryptocurrencies. Run the free History Loader first, so the history of a new category is ready.

Does it open trades?

No. MERAVITH SCANNER is an indicator. It finds the trends, draws the levels and gives you the plan with target, stop and position size. The order is yours to place.

What is the difference between MERAVITH and MERAVITH SCANNER?

They read a chart the same way. The SCANNER adds the M market scan across many symbols, with your own watchlists. If both are on the same chart, MERAVITH hides its buttons and board and keeps its lines, so the two never overlap.

The first scan of a new category is very slow or leaves rows empty.

MetaTrader has to download that history from your broker first, and a scan cannot wait for a download. Attach the free Enigmera History Loader to one empty chart and leave it running: it keeps the history of all Market Watch symbols on all 21 timeframes ready. If it reports "full up to Max bars", raise Tools → Options → Charts → Max bars in chart.

I clicked a result and the board disappeared.

Since version 2.20 the board stays open after a click. If you use an older version, download the current one from My account, replace the file, and remove the indicator from the chart and attach it again.

Can I scan only bullish trends, or only one currency?

Yes. In the picker set Dir to Bull or Bear, and tick the currencies under Cur. The filters combine with categories, lists and the timeframe choice.

Where are my lists, the board size and the results saved?

In files in MQL5\Files. They survive a restart and deleting the global variables with F3.

I installed a new version but still see the old one.

Remove the indicator from the chart and attach it again. MetaTrader keeps the old version running until you do.

Is there an MT4 version?

No. MERAVITH SCANNER needs the 21 timeframes and the volume data of MetaTrader 5.

How much does it cost, and where do I buy it?

MERAVITH SCANNER costs $2500 once, or $65 a month as a rent. MERAVITH, without the market scan, costs $400 once or $65 a month. Both are sold on enigmera.com and on the MQL5 Market by the same author, ENIGMERA, at the same prices. A licence from enigmera.com runs on your MetaTrader account number; a Market purchase is tied to your MQL5 account.

Can I try it before I buy?

Yes. Press Download on the product page and fill in the trial form: you get the full indicator free for a trial period on your own charts, with your own broker's data. The MQL5 Market also has a free demo for its Strategy Tester, but the tester runs one timeframe at a time and cannot show the 21-timeframe reading, so the trial on live charts is the real test.

Are there verifiable results?

Start with the chart itself. MERAVITH does not repaint. Every line is drawn bar by bar as the market went, and nothing drawn in the past is moved or erased later, so what you see behind the current candle is exactly what the indicator showed at that time. Scroll any chart back and you are looking at the record of how it read every trend: the history of the chart is the test itself. Beyond that, three more kinds. First, the free trial: you run the scanner on your own charts with your own broker's data and see every signal as it forms, which is the only test that counts for your own trading. Second, MERAVITH EA, an Expert Advisor that reads MERAVITH on all 21 timeframes and trades when the structure lines up, publishes every trade of its one-year Strategy Tester tests on the results page: all 28 Forex pairs on one account from 15.10.2025 to 15.10.2026, +470%, 186 trades, 93.5% closed at their target, the same test repeated on the data of three brokers, with the full list of trades and the charts. Third, the BT button on any chart counts the past trends of that symbol and timeframe as wins and losses. The reviews on the product page are from buyers on the MQL5 Market.

16Glossary

Market scan (M)
One pass over many symbols on the timeframes you chose. The results come back as one board, grouped by symbol.
Timeframe scan (S)
One symbol read on all 21 timeframes, one row per timeframe.
Liquidity line (Volume Equilibrium)
The balance point of the current trend on a timeframe. Support in a bullish trend, resistance in a bearish one.
Exhaustion target
A level where the trend is likely to run out. The 1st is the main target; up to 12 are drawn each way.
non-exh.
The trend has not reached its 1st target yet: the freshest state of a trend.
high vol / avg vol
Whether bars of unusually high volume confirm the trend.
Res
Higher timeframes whose liquidity line stands between price and the trend's target. Listed in orange at the end of a row; drawn blinking on the chart as RESISTANCE.
Bold row
High volume, no target reached, no warnings and no resistance: the cleanest setup.
warnings
An unclear volume picture: volume on both sides, volume against the trend, or a range.
Watchlist (List 1 to 5)
Your own set of symbols, scanned with one click.
Sort
Orders the results by the distance left to the first target, most room first.
Grey zone / liquidity pool
The space between the liquidity lines of two neighbouring timeframes that point in opposite directions. A place where price reacts.
Alt
A preview of the opposite trend that would take over if the current one ended now.
MERAVITH SCANNER is made by ENIGMERA. MERAVITH SCANNER · MERAVITH · MERAVITH User Guide on enigmera.com. This guide describes MERAVITH SCANNER 2.20.